Saturday, July 17, 2010

RADISH KURMA

There are so many side dishes are cooked for chappathi. Kurma varieties, curry varieties and dal curries are there to enhance the taste of chapathies. Up course, there are non-veg dishes too. This radish curry is a mouth-watering recipe which goes well with parottas and chappathies. This I have learned recently from my friend. Until that minute, I never believed that radish can be cooked so deliciously as a kurma variety.


முள்ளங்கி குருமா

Ingredients:

Big tomatoes-3
Oil- 3 tbsp
Cinnamon- 1
Cloves-2
Cardamom-2
Finely chopped small onions- 1 cup
Small garlic flakes-15
Chopped coriander- half cup
Medium sized radish-2
Chilli powder- half sp
Coriander powder- half sp
Turmeric powder- half sp
Salt to taste

Grind the following ingredients to a paste:

Shredded coconut- 3 tbsp
Fennel seeds- half sp
Poppy seeds- half sp

Procedure:

Put the tomatoes in full of hot water for some minutes and then remove the outer skins.
Grind the tomatoes in to a paste.
Heat a kadai and pour the oil.
Add the cinnamon, cloves and the cardamom and fry for a few seconds.
Add the sambar onions with the coriander and the garlic flakes.
Fry for a few minutes.
Then cut the radishes in to small cubes and add to the frying mixture.
Fry for a few seconds.
Add the powders with the tomato paste.
Pressure cook this mixture for 1 whistle.
When cooled, again pour the radish gravy in the same pan and add the ground paste with enough salt.
Cook for a few minutes.
The delicious radish curry is ready to serve now!

Friday, July 16, 2010

What You Need to Know Before You Install Central Air Conditioning

Time for a new central air conditioning system? The average air conditioner lasts about 15 years, so if you live in your home for more than 10 years or so, there’s a good chance you’ll eventually have to replace your system. If you have central air conditioning that was installed back in the 1990s (or earlier), keep in mind that today's air conditioning systems provide significantly greater cooling power and energy efficency.

Installing a central air conditioning system is one of the most significant steps you can take in improving the overall comfort of your home. Central air conditioning will also add value to your home, as it’s a very attractive selling point for potential buyers.

That being said, a new central air conditioning system is a major household investment and not a purchase one should make without doing some serious homework. If you’re due for an air conditioning system upgrade, there are several important considerations that can help ensure you get the best possible performance, energy efficiency and value.

Before you commit to a new central air conditioning installation, think about the following:.
  • Try Maintenance First. Have you been replacing the air conditioner filters according to schedule? Have you been scheduling a regular air conditioning tune-ups and cleanings? The problem may not be your air conditioner, but you! If your current air conditioning system seems to be operating at less than full capacity, have a professional air conditioning service technician come to your home to inspect it before you blow your savings on a brand new air conditioning system. Sudden changes in the function of an air conditioner that’s been performing just fine up to a point could mean that simple maintenance is in order, rather than a complete system overhaul. A certified professional can clean your system, run diagnostic testing, and make repairs or adjustments as needed. An experienced pro will also be able to tell you if it’s time to replace your central air conditioning system.

  • Totally New vs. Upgrading Your Existing Air Conditioning. You may not need an entirely new central air conditioning system at all...just some modifications to your existing system to enhance its performance. Upgrading an aging central air conditioning system requires a much different set of considerations than installing a new one. You’ll want to make sure you match brands and models, and choose new components that are compatible with older ones. If you’ll be replacing an old air conditoning system completely, you may incur extra costs for removal and disposal of outdated parts.

  • Air Conditioning Installation Circumstances. Be sure to communicate with your installation professional so he or she knows how best to approach your job. If your new air conditioning installation is part of a larger home renovation project, you may be able to save significantly by arranging for installation at a specific point in the job. Also, when your air conditioning professional is in the loop, he or she will be much better equipped to determine the best kind of system for your home and a much more accurate estimate.

  • Air Conditioning Power Requirements. Central air conditioners measure cooling capacity in British thermal units (Btu) per hour. Generally, you need about 12,000 Btu per 1000 square feet of well insulated space or 400 square feet of inadequately insulated space. Your home’s structure, windows, sun exposure, and climate will all impact your cooling needs. The best way to get an idea of what you need for your home is to talk to an HVAC professional. While an air conditioning technician may suggest products or installation features that might cost you more up front, they will likely save you much more in the long run.

  • Replacing an Aging Air Conditioning System. Like many other household appliances, central air conditioners have become significantly more energy efficient in the last ten years or so. If you’ve noticed a dramatic decrease in your system’s ability to cool your home—temperatures are inconsistent, the system seems to be coming on more frequently or running longer, or your monthly utility bills are steadily increasing—it may be time to replace your air conditioner. If your new air conditioner will be tied into an existing system in your home, talk to an air conditioning contractor about compatibility and installation options.

  • Air Conditioning System Accessibility. Installing a central air conditioning system means your installation technician will need access to your home’s air ducts. The easier the access, the less you’ll be charged in hourly labor costs. If your home is older or has limited duct space, you might want to think about purchasing a mini-duct or ductless air conditioner. These alternative systems are a much better and more cost effective choice for homes where installing traditional ductwork would be prohibitive.

  • Look for Energy Star Appliances. Choosing environmentally responsible products can be a challenge; for appliances and home electronics, the Energy Star program makes it easy. Simply look for the blue Energy Star label and know that you are getting the most eco-friendly, energy efficient air conditioner for your money. Air conditioning systems can have a huge impact on your summer utility bills, so it makes sense to look for an appliance that’s going to reduce your home’s overall energy consumption and save you money. Shop for air conditioners with a high SEER rating (most units range from 10 to 17). If you’re installing a central air conditioner, make sure your contractor knows your preferences and ask for a unit with the highest SEER rating possible.

  • The Noise Factor. This is your chance to get rid of that noisy old air conditioning unit that rattles and hums every time it powers on. Inexpensive air conditioners—either window-mounted or central—can cause a lot of noise pollution, especially if you have to install them in a bedroom, living room, or near a deck or patio. Consider placement carefully, and avoid areas close to living areas, bedrooms, and close to the neighbors. To guarantee quiet operation, go with a higher-end, more expensive model.

  • Sun Exposure. No matter how energy efficient your air conditioner, it will struggle to perform properly if it’s placed in direct sunlight. Try to install a new unit in an area of your home with plenty of shade, or plant shrubs or small shade trees close by.

  • Consult an Air Conditioning Pro. A professional HVAC technician will be able to answer any questions you have about installing a new central air conditioning system in your home...from proper placement to energy efficiency ratings to correct sizing for your square footage. If you are unsure about any aspect of air conditioning system purchasing or installation, call your local air conditioning contractor for advice.



Related Air Conditioning Installation Information from Horizon Services...

Getting Rid of Clogs in Floor and Shower Drains

Floor and shower drains are designed to withstand far more abuse than sink and toilet drains. However, drains in floors and showers are also more likely to accumulate the kind of debris that commonly forms clogs. Hair, bits of soap, shampoo residue, and other waste materials get caught just below the surface of the drain and can be hard to remove.

Shower drains -- whether in standing-only showers or tub and shower combinations -- may be the most frequent clogged drains in your house. With daily use, hair and other materials get caught in the drain and collect. Chances are if your shower is clogged it’s because of hair. The easiest way to try to get rid of the blockage is to pour a common, over-the-counter hair removal product like Nair or Vet down the drain. The depilatory will dissolve the hair and clear the clog. You can also try a simple solution of baking soda and plain white vinegar to dissolve the blockage. These solutions are much safer for you, your drains and your pipes then lye, Drano and other store-bought liquid drain cleaning products.

If your shower drain is clogged all the time, you may want to purchase a new drain cover or an inexpensive plastic catch (like the ones you use in kitchen sinks without garbage disposals) that’s specifically designed for showers. These will prevent more hair from going down the drain and should reduce the frequency of clogging.

If you’ve tried all of this and are still having problems, you should think about calling in a drain cleaning professional. Your drain might need to be taken apart in order to remove the clog; if you don’t know how to do this, it’s best left to a professional plumber. Be sure to ask about the general condition of the drain and your main sewer line, too. Corrosion, weakened couplings and connections, root infiltration, and other situations can affect the shower drain’s function.

Clogged floor drains are a special kind of plumbing matter. Typically found in laundry rooms, basements, and garages, these drains are often the final resting place for all kinds of nasty debris—lint, sand, oil, dirt, and other solid materials—as well as wastewater from washing machines, air conditioners, water heaters, and more. These substances can collect and harden in the drain; even powerful commercial chemical drain cleaners are not enough to get rid of clogs that have crystallized. Furthermore, if left untreated, a clogged floor drain can cause water to back up into your home causing expensive damage.

If you suspect a clogged floor drain, rent a power pipe snake that will break through the clog with special cutting blades. You may have to take apart some of the drain assembly, as many floor drains are designed to make accessing clogs or blockages easier. However, knowing how to disassemble your drain and knowing where to apply the snake can be tricky business. If you’re unsure about this method, it’s best to call in a plumbing and drain cleaning contractor. A plumbing and drain professional will not only get rid of the clog, but will also check the general state of your pipes and give you some tips about avoiding problems in the future.



Related Drain Cleaning Information from Horizon Services...