When purchasing a furnace, heat pump or air conditioner, ALWAYS ask about its
Efficiency Ratings. They will tell you will tell you how efficiently your heating and cooling equipment uses fuel (gas, oil or electricity). These ratings and standards are determined by the Environmental Protection Agency and other government and industry authorities, and all new heating and cooling sold today must meet certain efficiency rating minimums.
The most-frequently used efficiency ratings are:
- SEER (Seasonal Energy Efficiency Ratio): This ratio tells you the amount of cooling your system will deliver per dollar spent on electricity The SEER rating of any unit can range anywhere from 13 to 17. The higher the SEER the more efficient the system will be and the less it will cost in the long run to own and operate.
- HSPF (Heating Seasonal Performance Factor): Similar to SEER,it is a measurement of efficiency of the heating portion of a heat pump. HSPF ratings range from 6.8 to 10; high-efficiency units have efficiencies of 7.5 HSPF or above.
- AFUE (Annual Fuel Utilization Efficiency ratio): A measurement of the percent of heat produced by a furnace for every dollar of fuel consumed. The higher the AFUE rating, the lower the fuel costs. All furnaces manufactured today must meet at least 78%. Older furnaces (10 – 15 years or older) may fall below this minimum. Furnaces with AFUE ratings from 78% to 80% are considered mid-efficiency; ones with AFUE ratings above 90% are considered high-efficiency.
- MERV (Minimum Efficiency Reporting Value): Not a former talk show host. MERV is a filter rating system relating to the size of the holes in the filter that allow air to pass through. The higher the MERV rating, the smaller the holes and the higher the efficiency in capturing contaminants. MERV rating range from a low of 1 to a high of 16.
- ENERGY STAR: An Environmental Protection Agency designation attached to HVAC products that meet or exceed guidelines for high-efficiency performance above the standard government minimums.
If you have a furnace, air conditioner or heat pump that's 15 years or older, there's a good chance that it falls below the recommended ratings. If so, the chances are even higher that you're using too much energy and paying too much on your utility bills. You may want to consider upgrading to a more modern heating and cooling system that meets or exceeds today's recommended energy efficiency ratings and standards.
Look For The LabelWhen shopping for new HVAC equipment or any electrical appliance, look for the
EnergyGuide label, which should come with the equipment's paperwork or be posted on the appliance at retail stores. The
EnergyGuide will help you compare the energy use and efficiency of a particular model relative to other available models with the appropriate ratings listed above.
The federal government requires manufacturers to affix the label to the following products:
- Furnaces
- Boilers
- Central air conditioners
- Room air conditioners
- Heat pumps
- Water heaters
- Pool heaters
- Refrigerators and Freezers
- Dishwashers
- Clothes Washers and Dryers
ENERGY STAR-qualified models will have the ENERGY STAR mark on the label or somewhere on the appliance.
More About Efficiency Ratings...