Friday, September 19, 2008

wood door headboard; stripping paint

These doors used to separate the front two rooms. They're big, heavy and among the few things that are original to the house. While we definitely love them, we knew they couldn't stay there. They took up way too much space and offered no utility.


There was no question and no discussion necessary - we both knew they'd make a fantastic headboard, especially considering the fact that our current bedframe is low and we chose it because the master bedroom in our previous house had much lower ceilings. i.e.:

Ahhh, let's reminisce about the days when there were dust-free surfaces and the big decision to be made was whether or not that purple pillow should remain on the bed... ... ...
Oh that's right - this was our living room the other day:


Back to the doors - stripping the paint is step one. We used Klean-Strip stripper because after all, it is America's #1 Stripper Brand.

It's a gel and fairly easy to work with. The label says 15 minutes, which is a pretty convenient amount of time if you want to go crack open a bottle of wine and boil some noodles. The problem is that the label lies, which makes me wonder about their claim of superiority in the world of strippers. It actually works much faster. In 15 minutes it was dry - and everyone knows it's much better to work with wet strippers. I'd still recommend this product, as it worked quite well once we got the hang of it. We found that it's best to just keep an eye on it and start scraping a few minutes after the paint starts bubbling:

Scrape away:

It took a few rounds of stripper despite the fact that there were surprisingly few layers of paint on the doors. We wanted to keep a worn look to them, which was a good decision considering our skill level.

Break time - and we wanted to see one behind the bed.

After the paint was off, they were sanded;

and then stained with English Chestnut stain from Minwax. After the stain, we used two coats of a satin finish polyurethane, also by Minwax. In between the coats of poly we sanded them lightly giving the final finish a nice smooth feel. Ta-dah - here we are - nicks, scrathes and all. We love 'em.


We're now working on the pair of fireplaces on the first floor... the stripper is proving less effective. There are many more layers and some of the old stains seem to be made of tar as seen here:

We traded leftover muriatic acid for a loaner heat gun with our pals Jessica and Joy. So far, so good - more to follow.

***a picture of the headboard behind the bed is in this post